Accessories

3/8" drive Zyklop bit sockets. - 9-piece socket set on robust textile belt 3/8 - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - Long 3/8" socket for low-profile-fitting screw connections in tight construction spaces and for protruding threaded rods - Hexagonal profile enables precise and profile-preserving screwdriving with high power transmission - With Take-it-easy tool finder: color coding by size - 1x Belt B Deep 1 socket set, 3/8" drive, 9 pieces - 9x 8790 HMB Deep 3/8" socket: 8.0x64.0, 10.0x64.0, 12.0x64.0, 13.0x64.0, 15.0x64.0, 16.0x64.0, 17.0x64.0, 18.0x64.0, 19.0x64.0 - 1x Socket rail B (textile belt), 9 location, unloaded, 45 x 310 mm - 1x Hook-and-Loop Fastener Strips 30, 200 x 30 mm

• Made in U.S.A. (Maysville, KY) • Shallow baskets carry notebooks, boxes or other articles that lie flat • Dimensions: 18 x 13 x 6 inches; the basket tapers to 15.75 x 10.5 inches at the bottom • Extended handlebar clamps fit 7/8" and 1"diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables • Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs • 1392 has a Zinc plated finish and 1392GB has a Black Powder Coat Finish • Complete basket with fittings weighs 2.6 lbs.

This versatile basket is the most adaptable front basket Wald offers. - Made in U.S.A. (Maysville, KY) - Deep basket that is sized for a grocery sack - Dimensions: 14.5 x 9.5 x 9 inches; basket tapers to 12.25 x 7 inches - Extended handlebar clamps fit 7/8" and 1" diameter handlebars - Two-piece adjustable legs extend from approx. 14 inches to 22 inches and mount to either the front axle or fork eyelets for bikes with quick release front hubs - Available in gloss black (198GB) or white (198WH) Powder Coat Finish - Complete basket weighs 3 lbs.

This front basket system uses a bolt-on handlebar mount to allow for quick and easy removal of the basket itself. - Extended handlebar clamps allow greater clearance for shift and brake cables - Requires 3.5" of handlebar clearance for mount - Fits 7/8" to 31.8mm handlebars - Made in USA - Dimensions: 11.75 x 8 x 9"

- Steel wheels - For riders up to 100lbs - Fits 12" - 20" wheel bikes

Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds. - The Wald Training Wheels fit 16- to 26-inch bicycles. - The Wald Training Wheels support riders up to 125 pounds.

This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.

Wald's medium size twin rear carrier basket is a durable way to carry heavier loads. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry 1-2 small grocery bags in each side basket with greater confidence and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - Dimensions: 6.5 x 13.5 x 10 inches; tapers to 4.5 x 11.5 inches at the bottom - Rack is 5" by 13" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 520 has a Zinc Plated Finish; 520GB has a Black Powder Coat Finish - Complete basket with fittings weighs 5.3 lbs.

These steel fenders offer tire coverage that is durable with a timeless aesthetic. - The crescent full-coverage design offers a closer fit around the tire - Made in the USA

Wald's big boy rear twin carrier offers tremendous amounts of cargo capacity. The 535 Twin Rear Carrier Basket lets you haul a reusable grocery bag in each basket with room to spare. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry your groceries, gear, computer, or backpack with greater comfort and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - 7.5 x 18 x 11 inches; taper to 5 x 16 inches at the bottom - Rack is 5" x 16" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 535 has a Zinc Plated Finish; 535GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.2 lbs.

The Giant Delivery basket is one of the most enduring and iconic products in Wald's catalog. Popular among messengers and paperboys (feel free to ask your father or grandfather about this noble profession), this basket is designed to carry large loads thanks to its stout legs, cargo bands, and heavy-duty handlebar clamps. - Made in U.S.A. (Maysville, KY) - Great for delivery, industrial bikes and hauling large loads - Reinforcement bands add extra strength - this basket is built for rugged use - Dimensions: 21 x 15 x 9 inches; the basket tapers to 18.25 x 12.25 at the bottom - Extended handlebar clamps allow greater clearance for shift and brake cables. They are 3 5/8" apart and fit 7/8", 1" and 31.8mm diameter handlebars - Legs extend from approx. 14 1/2 inches to 23 inches and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - 157B has a Zinc plated finish and 157GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.8 lbs.

- Made in U.S.A. (Maysville, KY) - Dimensions: 20.5 x 13 inches - Extended handlebar clamps are 2" apart, allow greater clearance for shift and brake cables, and fit 7/8", 1", and 1 1/4" diameter handlebars - Legs extend from 13 3/4" to 21 1/4" and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - Powder Coat Finish - Complete rack with fittings weighs 6.0 lbs.

These fenders feature a classic, fluted profile and are highly polished. They're 63mm wide, designed for 700c wheels, and work with tires up to 55mm wide - the sweet spot for touring and city bikes. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Rear fender is crimped just above the chainstay mount to allow use of a front derailleur - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Watch this video and read the instructions to make sure your frame and fork has the correct mounts and hardware needed. If you need additional hardware, check out this page.

These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.

These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 35mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build.

- Pedal thread inserts are used to replace damaged threads in cranks

Topeak's Third Hook is the perfect addition to your Dual-Touch storage rack. Get two of these babies and your stand can now hold 4 bikes, enough for the whole family!

Need more carrying capacity for running errands? Then check out Topeak's Front Basket. It easily attaches to you bike's handlebars and holds all your groceries or whatever else you pick up. And, the handle makes this basket extremely portable.

Topeak's Fuel Tank mounts directly to your top tube, giving you quick and easy access to energy bars, your phone, wallet, tools or any small essential gear you need to keep close at hand while riding. The top opening, zipper accessed, main compartment keeps contents safe and secure.

Need more carrying capacity for running errands? Then check out Topeak's Rear Basket. It easily attaches to a Topeak QuickTrack rear rack (sold separately) and holds groceries, work clothes and anything else you need to transport. And, its handle makes it extremely portable.

The Mountain TT G Twin Turbo pump has a large, integrated 1-1/8"-diameter easy-to-read analog gauge. It fills both large-volume fat bike tires and higher pressure MTB tires with ease. TwinTurbo technology uses both strokes to compress air to deliver high-pressure output and saves time and effort. Integrated dust cap keeps pump head clean and thumb-lock lever ensures an air-tight seal. - Head: Presta / Schrader / Dunlop with integrated dust cap - Barrel: Aluminum - Thumb Lock/Handle: Polymer - Capacity: 60psi / 4bar, 1-1/8” Analog - Volume Per Stroke: 91cc - Added Features: Side mount bracket - Size: 25.3 x 4.9 x 4cm / 10” x 1.9” x 1.6” - Weight: 227g / 8oz

The most compact adjustable torque socket available. Works with a 5mm Allen wrench or any mini-tool with a 5mm Allen key to provide correct tightening of frame and component bolts to recommended torque values for safety and performance. - Torque range: 2 – 6Nm - Functions: 7 - Tool Material: Hardened steel - TorqSocket Material: Steel / Aluminum - Rubber strap, Carry case - Size: 6.9 x 1.7cm / 2.7” x 0.7” (TorqSocket) - Weigh (TorqSocket) : 72g / 2.54oz - Weight: (TorqSocket+bits+case): 128g / 4.51oz Tools: - 3 / 4 / 5 Allen bits - T20 / T25 Torx bits

Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity

- A multi-tool that includes a tubeless tire repair kit - 18 individual tools 22.5345mm hexes T25 Torx wrench stainless steel reamer knife plug tool and air stop - Also includes three 5mm thick tire plugs and integrated storage compartment - Vanadium s

Topeak's DeFender M1/XC11 fender set offers durable rain and mud protection on wet and sloppy rides. They're incredibly light and easy-to-use, too. The front installs easily to any standard fork and the rear connects to most seat posts. Their quick-release attachments allow the DeFenders to be installed and removed in seconds.

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

The RedLite 80 BT features 80 lumens and five lighting modes that can be wirelessly controlled via Bluetooth 5.0 by WhiteLite 800 BT or TetraBand BT. Bidirectional tool-free mounting with the included silicone strap for quick installation and removal on aero/round seatposts or seatstays - Battery: Li-Ion - Recharge Type: USB - Lumens: 80 - Lamp: Red COB 3W LED - Battery: 3.7V 1000mAh Lithium Ion (integrated) - Control: 5 modes (High 800 lm - 2.5hrs / Middle 400 lm - 5 hr / Low 200 lm - 9 hr / Blink - 200lm - 20 hr / Pulse 400 lm - 15 hr) - Charge/Charge Time: USB-C / 2 hr - Reserve Time: 0.5 hr - Mount: Strap mount fits aero or round seatposts (25.4 - 34.9mm), seatstay, and Topeak bags - Size: 3.2" x 1.5" x 1.3" - Weight: 51g. - Color: Black