Accessories

Day or night, the Stix Elite headlight packs a powerful punch. Running in Steady-High mode at night, it delivers 100 lumens of focused, strong, and bright light to guide your way. It’s a true to-see-by headlight. During the day, your visibility and safety becomes its first priority. Running in Power Flash mode, this tiny package delivers 200 lumens-worth of, “see me now,” light, making it a beacon for all road users. And depending on the chosen mode, the Stix Elite will run for up to 112 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 200 lumens output - Spherical lens delivers a to-see-by beam pattern. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 112-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with handlebars from 22.2mm up to 35mm in diameter - Six modes including: Steady High (100 lumens), Steady Low (38 lumens), Power Surge (97 lumens), Power Flash (200 lumens), Disco Flash (63 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

Nothing says, “see me now,” louder than a strong and bright taillight, both for day or nighttime use. With its spherical lens, which directs lumens more than a 1/2 mile (800m) in the brightest California sun, the Stix Elite taillight is the go-to taillight for our infamous Lunch Ride. It’s all about peace of mind, really, and with its six light modes, you get multiple options for day or night visibility. And depending on the chosen mode, this taillight will run for up to 77 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 100 lumens output - Dome lens concentrates output from CREE XBD P4 center LED for 1/2 mile (800m) visibility in the brightest sun. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 77-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with seatposts from 22.2mm up to 35mm in diameter, plus it's compatible with most seatstays (Aero strap mount available separately) - Six operating modes: Steady High (50 lumens), Steady Low (18 lumens), Power Surge (37 lumens), Power Flash (100 lumens), Disco Flash (40 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately

You really can put a Specialized Stix headlight almost anywhere. This headlight mount is designed to cleanly integrate into the headset of the bike and maintain a clean look with the Stix positioned just under the stem. - Positions Stix headlight just under the stem in front of the head tube for a super-clean, integrated look. - Interlocking system between plastic mount and aluminum spacer allows the light and mount to quickly be removed from the bike. - Works with 1-1/8th Aheadset-style headsets and custom 10mm thickness spacer.

Easily mount the Specialized Stix to your helmet with this Stix Helmet Strap mount that attaches securely through your helmet's vents. - Allows Stix light to be mounted horizontally or vertically. - Includes hook-and-loop strap to securely mount to helmet through vents.

Specialized's Stormproof Small Seat Pack provides you with all the storage (7.5x4x15cm) you need for your smaller gear in a low-profile, fully waterproof package. It features an expandable, zippered compartment, so you'll never run out of room for the essentials, plus a roll-up closure system that keeps its contents safe and secure. And knowing that you'll be using it as your go-to for inclement weather, they've included a reflective patch at the rear, as well as clip-mount for a Stix light, in order to increase your visibility to motorists in low-light conditions. - Saddle Mount offers secure attachment to the SWAT mounts on Specialized saddles. - Optional strap for use with non-Specialized saddles. - Roll-up closure for ultimate flexibility of what you can carry and fully waterproof construction. - Reflective patch on back that also allows for a Stix light to be clipped on securely with the fabric clip. - Dimensions (cm): 7.5 x 4 x 12

Keep the road grime off your clothes, and arrive in style, with a durable fender set made specifically for the Turbo Como. It's all dry roads from here. - Durable fender set that's specifically designed to fit the Turbo Como. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and specific alloy hardware ensure the perfect fit for your Turbo Como. - Front fender supports Plug + Play mounting. - Front Length: 790mm - Rear Length: 1180mm

The new Turbo Connect Display (TCD) is the best way to view data on your Turbo. It not only displays basic ride metrics (speed, cadence, power, battery level, and time), but it also lets you toggle between modes. Its design, meanwhile, is rugged and clean, and it has multiple mounting options for either road or mountain setups. As for the latest version of the Mission Control App, you’ll find that it now has more features and is even more intuitive to use. It lets you custom-tune nearly every aspect of the bike with ease, monitor your power usage, control your range, perform basic system diagnoses, and record/upload rides. - Monochrome LCD display (black/white). - Screen Size: Height (40mm), Width (35mm), Diagonal (52mm), Display (2 inches) - ANT+ & Bluetooth modules for easy communication. - Sits centrally on the handlebars at the stem and has either a twist-lock or an optional theft-resistant lock. - Twist-lock can be turned on the handlebars, while the display also fits others popular mount options. - Protection standard IPX7 (suitable for splashes, rain, or snow).

This custom Li-Ion Turbo Vado Battery features a 604Wh capacity and is compatible with all Turbo Vado models. It's fully integrated with the frame, removable for easy charging and lockable for added security. - Please Note: The Turbo Vado Battery does not include a battery cover. - Battery features a 604Wh capacity. - Works with all Turbo Vado models. - Lockable and down tube integrated. - Chargeable either on- or off-the-bike. - Includes LED power indicator.

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Left-hand loading on the down tube—right-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

The Zee Cage II has incredible holding power, and it's compatible with SWAT solutions for tool and storage integration. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right-hand side. - SWAT-compatible design allows for storage and tool integration. - Reinforced composite material improves durability without adding weight. - Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area. - Right-hand loading on the down tube—left-hand loading on the seat tube. - Sleek, minimalist design with razor-sharp graphics. - Accepts SWAT Cage Mount MTB Tool. - Accepts MTB SWAT Box (when used on compatible frames). - Weight: 43g

Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps

Reliable. Durable. Quieter Than Ever Before. When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train. The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Following the Saris direct drive smart trainer legacy, the H3 features the same reliably and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified. Specs - Noise level: 59 decibels at 20 mph - Power measurement accuracy: +/- 2% - Maximum power output: 2000 watts at 20 mph - Simulates a 20% climbing grade - Fast response electromagnetic resistance - Measures speed, cadence and power – no external sensors needed - 20 lb precision balanced flywheel - Integrated dual ANT+ FE-C and Bluetooth FTMS standards - Built-in front wheel block - Integrated carrying handle - Compatible with Shimano 8-11 speed cassettes - XD/XDR freehubs sold separately (link) - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 (link). - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates and calibration via the Saris app (link to firmware page) - Maximum weight (rider and bike): 300 lbs. - Dimensions when Open L*H*W: 31x18.5x19.5 inches (787.4x469.9x495.3 mm). - Dimensions when Closed L*H*W: 8.5x18.5x19.5 inches (76.2x469.9x495.3 mm). - Weight: 47 lb. (21.3 kg). - Cassette sold separately.

The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground

Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy, or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice. This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And, thanks to integrated speed, cadence, and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride. - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings up to +/- 5%. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm. - Optional thru-axle adapter available for 142x12mm and 148x12mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence, and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts. - Comes on the Saris foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0-inch tire. - Does not fit 650c wheel sizes, nor all 29er tires. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Trainer tire recommended - Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad, and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date. - Some assembly required - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - ANT+ and BlueGiga USB dongles sold separately - Not compatible with CycleOps- or Saris-branded 20/24" wheel adapter

Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps

Applications: - ESGE Rear Kickstands - Spring for side movement - Dampening of the stay - Fatigue test for spring mechanism - Expendable in 7.5mm steps Delivery: - Mounting hardware M5x20 / M6x20 (special size on request) - Plastic shoe black Material: - Aluminium die-cast GD-AlSi9Cu3 - Color Kickstand: powder coated black or metallic - silver - Plastic Kickstand Shoe with a large surface - Pin hardened steel, zinc-plated - Mounting screws stainless Specifications: - Strut length L1 315 - 380 mm every 7.5 mm (26"-29") - Support hole distance 18 mm - Weight 260 g - max. Load 18 kg

Compatible with Eco Rack - Extra long replacement stays for Eco rack - Length: 15.5"

Planet Bike's Ozone ATB Comp Mini-Pump is a ride-saver. For easy pumping and fast fills, it boasts a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

Designed for the casual cyclist, the economical WTK-2 contains the tools needed for many basic adjustments and repairs at home or on the road.

This dual-sided brush is specifically designed for cleaning hard-to-reach areas of the bicycle drivetrain. The long, stiff bristles of the GSC-3 are narrow enough to reach between the gears of tightly-spaced modern cassettes, while the slim contoured end is capable of picking grit and grime out of tight spaces such as derailleur pulley wheels.

The MTC-30 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible drivers - Combo cross/straight tip screwdriver - 8 & 15mm box wrenches - Key ring holder - Weight: 131g (4.62 ounces)

The MTC-40 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible driver - Combo cross/straight tip screwdriver - 5- to 12-speed compatible chain tool* - Rotor straightener - CO2 cartridge inflator adaptor - Bottle opener - Key ring holder - Weight: 217g (7.65 ounces) *The MTC-40 chain tool will not peen Campagnolo 11-speed chain rivets (see CT-4.3 or CT-6.3)

This combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending and flexing, with a molded handle for comfort. - 1/8-inch model works on 1/8-inch chains and sprockets - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring Tools - Features hardened pins to keep the chain in place

- Front flat rack with integrated rear guard protects head tube and cables from cargo - Perfect for wide or oddly shaped cargo - Mounts to caliper hole and front axle - Adjustable fit for 26", 27.5", 29", and 700c - Heavy-duty AL6061-T6 alloy construction supports up to 55lbs - Platform area measures 12" x 14"

A simple plastic fender that can be used on either the front or rear of the bike with styling to match your ride. - Available in multiple colors - Made in the USA

Lezyne takes seatpack storage to the next level with their M-Caddy QR. Inside, fitted neoprene compartments organize your gear for easy access, while a durable, water-resistant zipper guards against moisture. Plus, a bottom compartment with a Velcro closure securely stores your multi-tool away from your spare tube, eliminating the possibility of a premature puncture. The M-Caddy also boasts an easy quick-release mounting system and a reflective taillight loop for safety.

Kryptonite KryptoLok combination U-Lock provides 6 out of 10 protection on Kryptonite's security rating scale. A 4-digit, resettable combination allows the protection of a U-Lock with the convenience of not having to carry keys. Included FlexFrame bracket carrys the lock securely during transport. - Double deadbolt provides strength - 12.7mm shackle - Durable easy to use dials - Includes Flexframe bracket - Rotating cover protects from dust and debris - Easy to use 4-digit resettable mechanism - protective vinyl coating - Combo Safe Program - 4" x 9" (10.2cm x 22.9cm) - 2.9 lbs (1.32 kgs)

- 3mm hardened steel links for moderate security lockups - Includes easy-to-install transport bracket - Includes 2 keys - Key Safe Program - Product dimensions: Length 85cm - Product weight: 1.70 lbs

- 3mm hardened steel links for moderate security lockups - Includes easy to install transport bracket for hassle free transportation - Easy to use dials with highly visible digits that provide a high level of ergonomics - Compact and easy transport - Product dimensions: Length 85cm - Product weight: 2.18 lbs

- Easy-Click Locking - Ergonomic dials for ease of use - New easy to use reset design - Included bracket to easily carry on a bike (-03, -06)

SPECIFICATIONS & FEATURES - 10mm, flexible BRAIDED STEEL CABLE provides increased cut resistance - ADVANCED CYLINDER provides greater protection from picking - EASY-CLICK locking - no need for keys when locking up - Dual sliding cylinder WEATHER GUARDS with automatic close feature - 2 EASY-TO-USE REVERSIBLE KEYS - Key Safe Program - Product dimensions: 3/8” (10mm) cable diameter 5’ (150cm) cable length - Product weight: 0.95 lbs (0.43 kgs)

- Easy-Click Locking - Ergonomic dials for ease of use - New easy to use reset design - Included bracket to easily carry on a bike (-03, -06)

Constantly improving. Kryptonite's New-U generation of U-Locks features a patent-pending double deadbolt design, anti-rotation capability, sliding dust covers, and an updated, modern design. The KryptoLok has a security rating of 6/10 making it a great choice for quick urban stops or longer suburban stops. Specifications & Features: - 6/10 security rating - 12.7mm hardened PERFORMANCE STEEL SHACKLE - Patent-pending HARDENED DOUBLE DEADBOLT DESIGN gives additional protection against twist attacks - HIGH SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes 2 STAINLESS STEEL KEYS, with ergonomic design to reduce the amount of torque, and keep them from bending or breaking - NEW DUST COVER - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - 2 stainless steel keys - Key Safe Program - Product dimensions: 5” x 9” (12.7cm x 22.9cm) - Product weight: 3.2 lbs (1.45 kgs)

Constantly improving. Kryptonite's New-U generation of U-Locks features a patent-pending double deadbolt design, anti-rotation capability, sliding dust covers, and an updated, modern design. The KryptoLok has a security rating of 6/10 making it a great choice for quick urban stops or longer suburban stops. Specifications & Features: - 6/10 security rating - 12.7mm hardened PERFORMANCE STEEL SHACKLE - Patent-pending HARDENED DOUBLE DEADBOLT DESIGN gives additional protection against twist attacks - HIGH SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes 2 STAINLESS STEEL KEYS, with ergonomic design to reduce the amount of torque, and keep them from bending or breaking - Includes 4’ KRYPTOFLEX DOUBLE LOOPED CABLE for securing front wheel or accessories - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 3.25” x 7” (8.2cm x 17.8cm) - Product weight: 3.25 lbs (1.47 kgs)

Constantly improving. Kryptonite's New-U generation of U-Locks features a patent-pending double deadbolt design, anti-rotation capability, sliding dust covers, and an updated, modern design. The KryptoLok has a security rating of 6/10 making it a great choice for quick urban stops or longer suburban stops. Specifications & Features: - 12.7mm hardened PERFORMANCE STEEL SHACKLE - New Patent-pending HARDENED DOUBLE DEADBOLT DESIGN gives additional protection against twist attacks - HIGH SECURITY DISC-STYLE CYLINDER is pick and drill resistant - Includes 2 STAINLESS STEEL KEYS, with ergonomic design to reduce the amount of torque, and keep them from bending or breaking - Includes FLEXFRAME-U BRACKET providing convenient multi-location u-lock transport - Protective vinyl coating - Key Safe Program - Product dimensions: 4” x 9” (10.2cm x 22.9cm) - Product weight: 2.9 lbs (1.32 kgs)

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.

- The first Certified Gluten free waffles - Certified USDA organic single-serving wrapped waffles - 140 calories per 30 g package with 5 g of plant based protein

Make every ride count with Edge 130 Plus. Never stop cycling with this compact GPS bike computer. Whether you ride to explore new trails or to save the planet in your daily commute, go with Edge 130 Plus. - No more excuses. Wirelessly sync workouts right to your Edge device. - Are we there yet? The ClimbPro feature helps you gauge your effort on a hilly route. - Know where to go. Thanks to easy-to-follow navigation with turn prompts. - Extra awareness and incident detection. Peace of mind for you and your fans back home. - Stay in touch while you’re on your bike with a variety of connected features. - Get more from every charge — up to 12 hours of battery life in GPS mode. In the box: - Edge 130 Plus - Standard Mount - USB cable - Tether - Documentation

Introduce the rider you are today to the one you’ll be tomorrow. The Edge® 540 cycling computer offers targeted adaptive coaching when used with your compatible power meter and heart rate monitor. It helps you manage your efforts by providing power targets throughout a course plus stamina insights, so you know how much gas is left in the tank. Get superior positional accuracy under dense tree cover or the urban canyon, thanks to multi-band GNSS technology. It features button controls that work in any conditions. Whether you’re riding roads, trails, gravel or indoor, you can benefit from insights and workouts that will help you understand your strengths and weaknesses and prepare for upcoming races or personal milestones.

Performance GPS Cycling Computer with Mapping and Touchscreen - Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more - Cycling safety features include new bike alarm, group messaging and tracking, incident detection and compatibility with Varia rearview radar and lights so you can see and be seen - Includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus on-device route creation, off-course recalculation and back to start; mountain biking model has integrated Trailforks data, including trail difficulty ratings - Customize with free apps, widgets and data fields from the Connect iQ Store - MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time - Battery life: up to 20 hours with GPS; extendable up to 40 hours with the Garmin Charge power pack or in battery save mode Who cares that the Edge 830 touchscreen cycling computer offers dynamic performance monitoring and insights to help you improve? You do. So, whether you’re a podium finisher, Kona qualifier, gravel grinder, straight-shaven, urban pedaler, dirt ball or somewhere in between, Edge 830 is ready to roll as your new riding partner. In The Box - Edge 830 - Flush out-front mount - Standard mount - Tether - USB cable - Documentation

Performance GPS Cycling Computer with Mapping and Touchscreen - Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more - MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time - Cycling safety features include new bike alarm, group messaging and tracking, assistance and compatibility with Varia rearview radar and lights so you can see and be seen - Includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus on-device route creation, off-course recalculation and back to start; integrated Trailforks data includes trail difficulty ratings - Customize with free apps widgets and data fields from the Connect iQ Store - Battery life: up to 20 hours with GPS; extendable up to 40 hours with the Garmin Charge power pack or in battery save mode - Includes Mountain bike mount, Edge remote, Silicone case and Speed sensor Who cares that the Edge 830 touchscreen cycling computer puts trail maps and ratings at your fingertips and offers insights to help you improve? You do. So, whether you’re an enduro extremist, a black diamond expert or somewhere in between, Edge 830 is ready to tame the trails with you. In The Box - Edge 830 - Mountain bike mount - Standard mount - Edge remote - Silicone case - Speed sensor - Tether - USB cable - Documentation

Introduce the rider you are today to the one you’ll be tomorrow. The Edge® 840 touchscreen cycling computer offers targeted adaptive coaching when used with your compatible power meter and heart rate monitor. It helps you manage your efforts by providing power targets throughout a course plus stamina insights, so you know how much gas is left in the tank. Get superior accuracy under dense tree cover or the urban canyon, thanks to multi-band GNSS technology. It features button controls that work in any environment matched with a responsive touchscreen so you can tap, pan and swipe on the fly. Whether you’re riding roads, trails, gravel or indoor, you can benefit from insights and workouts that will help you understand your strengths and weaknesses and prepare for upcoming races or personal milestones.

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.

Showroom™ Polish & Protectant with Ceramic Technology delivers maximum luster, it repels water, and prevents grime buildup. Your bike and components will stay clean for longer intervals. Showroom is safe for use on clear coat, carbon fiber, aluminum, titanium, steel, chrome, and stainless steel. Simply spray on and let sit for 10 seconds. Then wipe off with a clean rag. Due to Showroom’s proprietary formulation there is no need to pre-wash the bike. Enjoy the shine! Showroom Polish & Protectant will: - Clean frames and components without a prewash - Protect the bicycle from water and perspiration - Prevent a buildup of grit and grime - Keep your bicycle looking new

The perfect ride-saver that’s so compact you’ll forget you’re carrying…until you need it. This CNC machined, 4-in-1 spoke wrench and valve extender tool can restore a wheel knocked out of true, and change a valve extender during a flat repair. And while you hopefully never need to use it, the Spoke Wrench is one of those tools you ‘ll be glad you had if the situation arises. Available separate, or find it in our Team Edition and Ride Prep Tool Kits. - 4-in-1: 3 spoke nipple tools and 1 valve extender tool - 3.23mm (0.127?) slot fits many DT Swiss, Marwi, Edco and Wheelsmith square nipples - 3.3mm (0.130?) slot fits 15G square nipples - 3.45mm (0.136?) slot fits 14G square nipples - Fits the standard for valve extenders on long-valve presta inner tubes and tubeless presta valve wheels - Hardened CRV tool steel maintains precision edges for a lifetime - Found in our Ride Prep and Team Edition Tool Kits - Limited Lifetime Warranty

- Made of resistant chromoplastic - Stainless steel bracket and stays - Pre-assembled for fast and easy installation - Extra long mudflaps provide ultimate coverage

High-end storage for a high-end ride. MIK stands for Mounting is Key. That functionality is ideal for a rear basket. Easy on. Easy off. But it looks so nice you'll probably stick with easy on. Carry your cargo in style. - Compatible with MIK rear racks / MIK adapter plate installed - Lightweight aluminum - Black powder coated finish - Carries up to 9kg (20 lb) - Dimensions: 42cm (l) x 26.5cm (w) x 18cm (h) - Attachment: MIK - Includes hardware: Yes

Look back at it Add a touch more personality and a touch more safety. Install, adjust and cruise. It's that easy. Objects in mirror are cooler than they appear. - Can be adjusted for use on right or left side of handlebars - Designed for Electra kraton lock-on grips - Dimensions of mirror: 10 cm wide x 6 cm tall x 10 cm long arm